One of the leading resale parts in the country is heavy equipment parts.
Most factory recommended oil changes are at 200 hours of run time for construction equipment. And on the hydraulic system, every 600 to 800
hours. That will consist of, down time, and oil disposal costs. The average equipment runs up to 10,000 hours before it’s major overhaul is scheduled. That could be up to 50 oil changes and 13 hydraulic system changes. That is, if there are no major problems in that 10,000 hours.
Factory filters clean down to 15 microns.
A factory engine oil system will filter down to 15 microns on an average piece of equipment, but what if we could filter that same piece of equipment down to 1 micron ? That would prevent the particles that do the most engine damage from ever getting into the engine, and we could see double the engine life. Engine damage starts at 4 to 6 microns, shows a "General Motors Company" contamination chart, and by just filtering the oil down to 5 microns, they have seen an 8 fold savings on engine wear and down time.
Filtakleen filters down to 1 micron.
The FILTAKLEEN filtering system offers 1 micron filtration and also helps reduce the fuel soot which is a major contributor to engine failure. With FILTAKLEEN’s unique design, we filter 1 1/2 gallons of oil per minute, still allowing the main full flow filter to continue working, while the FILTAKLEEN filter strips away the contaminants and particles from the oil, returning fresh, clean oil back into the oil sump.
Oil sampling, with the Filtakleen product, has proven that fuel soot will be reduced and the TBN of the oil will stay higher. This means oil drain intervals may be increased up to 10 times if desired. With the FILTAKLEEN filtering system, 100% of the water, can be removed. A hydraulic system creates high temperatures. This also creates condensation. Our filter helps control these temperature changes by removing soot and contaminants, and at the same time offer a 1 micron filtering capability to help reduce down time in those highly technical hydraulic systems.
Your major long term benefits are:
So don’t wait until your equipment is down and you're losing money daily, have FILTAKLEEN help you solve your maintenance problems with one call, and our technical department will set you up with what you need to stay PROACTIVE.
Contact us today, and we will begin saving your bottom line tomorrow.
 |
|
|
|
|
|
|
|
|
 |
 |
 |
 |
 |
 |
 |
 |
|